Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools/Maintenance

White Lightning Clean Ride
$10.99 - $12.99
Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!
Wheels Manufacturing Inc. BB30 ABEC-3 Bearings & Clip Kit for SRAM DUB Cranks
$47.25
BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
Wheels Manufacturing Inc. Open Bore Adapters
$9.50
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
Wera 667/1 IP Torx Plus Bit
$6.99
High-quality bits for recessed Torx Plus screws. Torx Plus profile: in comparison to normal Torx profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. - For Torx Plus screws - Particularly hard for semi-hard materials - 1/4" hexagon drive - High torque transfer - Size: 40 IP x 25mm
Unior Left Pedal Insert
$9.99
For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.
Tri-Flow Superior Lube
$8.99 - $51.99
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
SwissStop Alloy Rim Cleaning Block
$6.99
- Removes brake pad material from alloy rims without damaging it - Use just like an eraser
Shimano Mineral Oil
$11.00 - $31.77
Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic
SRAM Butter Grease
$11.00 - $41.00
SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!
SRAM Rear Derailleur B-Gap Tool
$6.00 - $15.99
The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.
RockShox Bleeding Edge Tool
$21.99
- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting
RockShox Fork Service Kit
$17.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
RockShox Reverb Seatpost Bleed Tool
$6.00
RockShox, 00.6815.066.020, Reverb post bleed tool
RockShox Reverb Suspension Oil
$5.99 - $24.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.
RockShox Suspension Oil
$24.00 - $38.00
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
Rock-N-Roll Absolute Dry Bike Chain Lube
$9.99
Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only
Pedro's Tire Levers
$3.99
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
Park Tool Axle Vise
$16.95
Park's AV-1 Axle Vise makes repairing and overhauling hubs easier than ever. It prevents your axle from spinning while work is done on the hub and it has two different size receptacles so it will work with both front and rear axles.
Park Tool Bottom Bracket Bearing Tool Set
$46.95
The BBT-30.4 Bottom Bracket Bearing Tool Set is designed and built to install and remove the bearings used in BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems. The BBT-30.4 features a bushing set used in conjunction with a head cup press to quickly and precisely press the BB30 and PF30 bearings in the bottom bracket shell. The included BB30 bearing remover works from inside the shell to easily push out bearings.
Park Tool Cassette Lockring Tool with 5mm Guide Pin
$9.95
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
Park Tool Crown Race Setting System (1, 1-1/8 -inch)
$85.95
Quickly, safely and easily set your crown race with Park's CRS-1 Crown Race Setting System. It includes 6 different inserts (3 for 1-inch and 3 for 1-1/8-inch steerer tubes) that ensure full contact with the crown race for precision installation.
Park Tool Cutting Fluid
$16.95
The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.
Park Tool HCW-4 Bottom Bracket and Crank Wrench
$23.95
Park's Crank and Bottom Bracket Wrench is perfect for working on old-style bottom brackets. The HCW-4 utilizes a 36mm box-end head and a pin spanner for your bottom bracket removal and installation needs.
Park Tool Hex Wrench (11mm)
$9.45
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
Park Tool P-Handle Hex Wrench Set
$84.95
Engineered for fit, function, and leverage, these L-shaped shop-quality hex wrenches are a must have for every workshop. - High-torque, industrial steel wrenches - Straight hex shaft on the short side, ball end on the long side - Includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm - Comfortable, ergonomically designed nylon handles fit perfectly in your hand - Durable wall/pegboard mount tool holder allows easy access and organization
Park Tool P-Handled Torx Wrenches
$8.95 - $10.95
They always say, the right tool for the right job. Park's P-handled Torx Wrenches are available in T6, T8, T10, T15, T20, T25, T30 and T40 sizes. They feature offset handles made from durable nylon with a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for excellent durability.
Park Tool PolyLube 1000 16-Ounce
$20.99
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park Tool PolyLube 1000 4-Ounce
$8.99
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park Tool Replacement Clamp Covers
$12.59 - $22.04
Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)
Park Tool Rotor Truing Gauge
$43.95
Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand (each sold separately). Park Tool's Rotor Truing Gauge features an infinitely adjustable, finely threaded indicator gauge. It works with any diameter brake rotor.
Page 1 of 2 Next page